洛杉矶MC机房 高速低价18元起

DIYVM

堪**服务还是不错的 附带一下win的方法

提示:如果官网是英文页面,建议使用谷歌浏览器能同步翻译页面。点击下载【谷歌浏览器最新绿色便携版】
注意:部分文章发布时间较长,可能存在未知因素,购买时建议在本站搜索商家名称,先充分了解商家动态。
交流:唯一投稿邮箱:hostvps@88.com。

网友 weiai 说:

*帖最后由 weiai 于 2022-6-10 23:29 编辑

10刀的机器 之前没有Debian和pve
今天加上了Debian10和pve6
**都是自动化安装的

关于DD win   可以参考一下方法

先使用原来的**或者**模式

这里建议使用NAT.EE大佬的包
**et -O- http://你自己vps做的直链ip/**包 |gunzip -dc |dd of=/dev/sda

之后再次安装**模式

执行
ntf**ix /dev/sda1
ntfs-3g /dev/sda1 /mnt/windows

之后挂载**tp  

打开windows文件夹,有一个nat.cmd

编辑setmode  = on

IP设置你登陆的IP
掩码 255.255.255.248
网关 ,你IP 的 的前一位  如:ip是192.168.2.222  网关就是192.168.2.221

之后保存,reboot就行了


网友 yanaxiao 说:

那么问题来了,去哪里买?


网友 zxxx 说:

没有10刀的机器


网友 天行九歌 说:

啥机子


网友 weiai 说:

zxxx 发表于 2022-6-10 23:27
没有10刀的机器
网友 zxxx 说:

weiai 发表于 2022-6-10 23:30
看看15刀的有没有,应该也加了
网友 weiai 说:

zxxx 发表于 2022-6-10 23:32
选择哪一个?
网友 zxxx 说:

weiai 发表于 2022-6-10 23:34
Debian10不就可以安装pve了,应该也是帮你加了,如果你说ddwin的话。可以用sysrcd就行,4.3.1 …
网友 mjj666zzz 说:

哪里买


网友 laianguo 说:

nat。ee包可以  其他包大多数都不行。DD过N次其他包都失败。但是nat.ee包太过精简。


网友 OPlin 说:

哪有pve6 只有5啊


网友 zxxx 说:

ntf**ix /dev/sda1

ntf**ix -b -d /dev/sda1
Mounting volume… Failed to read last sector (31455231): Invalid argument
HINTS: Either the volume is a RAID/LDM but it wasn’t setup yet,
   or it was not setup correctly (e.g. by not usin***dadm –build …),
   or a w**ng device is t**ed to be mounted,
   or the partition table is corrupt (partition is **aller than NTFS),
   or the NTFS boot sector is corrupt (NTFS size is not valid).
FAILED
Attempting to correct er**rs… Failed to read last sector (31455231): Invalid argument
HINTS: Either the volume is a RAID/LDM but it wasn’t setup yet,
   or it was not setup correctly (e.g. by not usin***dadm –build …),
   or a w**ng device is t**ed to be mounted,
   or the partition table is corrupt (partition is **aller than NTFS),
   or the NTFS boot sector is corrupt (NTFS size is not valid).
FAILED
Failed to startup volume: Invalid argument
Failed to read last sector (31455231): Invalid argument
HINTS: Either the volume is a RAID/LDM but it wasn’t setup yet,
   or it was not setup correctly (e.g. by not usin***dadm –build …),
   or a w**ng device is t**ed to be mounted,
   or the partition table is corrupt (partition is **aller than NTFS),
   or the NTFS boot sector is corrupt (NTFS size is not valid).
Trying the alternate boot sector
$MFT LCN (78**32) or $MFTMirr LCN (2752383) is greater than the number of clusters (124671).
Unrecoverable er**r
Volume is corrupt. You should run chkdsk.
网友 zxxx 说:

ntfs-3g /dev/sda1 /mnt/windows

ntfs-3g /dev/sda1 /mnt/windows
Failed to read last sector (31455231): Invalid argument
HINTS: Either the volume is a RAID/LDM but it wasn’t setup yet,
   or it was not setup correctly (e.g. by not usin***dadm –build …),
   or a w**ng device is t**ed to be mounted,
   or the partition table is corrupt (partition is **aller than NTFS),
   or the NTFS boot sector is corrupt (NTFS size is not valid).
Failed to mount ‘/dev/sda1’: Invalid argument
The device ‘/dev/sda1’ doesn’t seem to have a valid NTFS.
Maybe the w**ng device is used? Or the whole disk instead of a
partition (e.g. /dev/sda, not /dev/sda1)? Or the other way a**und?
网友 wlz 说:

zxxx 发表于 2022-6-11 00:55
ntfs-3g /dev/sda1 /mnt/windows
网友 zxxx 说:

wlz 发表于 2022-6-11 01:54
这一步是要先dd包跑完之后再做的
网友 superneed 说:

zxxx 发表于 2022-6-11 01:55
是的,感谢大佬提醒!
网友 zxxx 说:

superneed 发表于 2022-7-2 22:33
为什么要先DD完之后再安装**模式啊,那之前DD的不就没了么?
为什么要挂载**tp啊,这个怎么*作?
…
网友 superneed 说:

zxxx 发表于 2022-7-2 22:35
**模式相当于U盘/光盘启动之类的,不会**硬盘的文件。

不挂载**tp的话,通过vi/nano等编辑器直接修 …
网友 zxxx 说:

superneed 发表于 2022-7-2 22:56
谢谢大佬,我的windows文件夹下面没有nat.cmd这个文件咋办
网友 nat.ee 说:

zxxx 发表于 2022-7-2 23:04
你用的不是natee的包么?
网友 ma**666 说:

20刀随便安win


网友 superneed 说:

nat.ee 发表于 2022-7-2 23:10
以前lite文件夹的包是这样在windows文件夹下有个nat.cmd,但是新版的**宝系列(gua****o)我改变了这个自 …
网友 zxxx 说:

nat.ee 发表于 2022-7-2 23:10
以前lite文件夹的包是这样在windows文件夹下有个nat.cmd,但是新版的**宝系列(gua****o)我改变了这个自 …
网友 superneed 说:

zxxx 发表于 2022-7-2 23:17
原来是这样,感谢大佬!
网友 superneed 说:

nat.ee 发表于 2022-7-2 23:10
以前lite文件夹的包是这样在windows文件夹下有个nat.cmd,但是新版的**宝系列(gua****o)我改变了这个自 …
网友 chxin 说:

wlz 发表于 2022-6-11 01:54
这一步是要先dd包跑完之后再做的
网友 zxxx 说:

superneed 发表于 2022-7-2 23:23
大佬,给个nat.ee 2012的DD包吧,实在难找,最好不是lite版*的,谢谢啦
网友 zxxx 说:

chxin 发表于 2022-7-2 23:27
我用**模式dd完,就是exfat格式的,可以不用ntfs-3g挂载直接修改,进**还是ntfs格式 …
网友 chxin 说:

zxxx 发表于 2022-7-2 23:29
那个包这么神奇?
网友 zxxx 说:

chxin 发表于 2022-7-2 23:36
就natee大佬的win10ltsc2021,难道我这个是个例,好像所有包D完都是exfat
网友 superneed 说:

zxxx 发表于 2022-7-2 23:27
http://vps0.net/d/natee/win/gua****o/gua****o-winsrv2012r2-data-x**-cn/gua****o-winsrv2012r2-data- …
网友 小白鸡 说:

weiai 发表于 2022-6-10 23:30
看看15刀的有没有,应该也加了

About 贝壳

【声明】:本博客不参与任何交易,也非中介,仅记录个人感兴趣的主机测评结果和优惠活动,内容均不作直接、间接、法定、约定的保证。访问本博客请务必遵守有关互联网的相关法律、规定与规则。一旦您访问本博客,即表示您已经知晓并接受了此声明通告。

 收藏 (0) 打赏

您可以选择一种方式赞助本站

支付宝扫一扫赞助

微信钱包扫描赞助

本文链接:贝壳主机网 » 堪**服务还是不错的 附带一下win的方法

分享到: 生成海报
香港/美国/国内高速VPS
切换注册

登录

忘记密码 ?

切换登录

注册

我们将发送一封验证邮件至你的邮箱, 请正确填写以完成账号注册和激活