Ubuntu和Debian8+ 上一键安装并配置 WireGuard

WireGuard 内核模块式的加载, 效率非常高.不过这东西是用UDP发送数据, 所以到了晚上就不会那么友好.作者亲测Ubuntu 16.04 LTS Server – 64 Bit和Debian均能完美支持。安装好后如不能上网，将客户端的DNS更改成8.8.8.8。本文测试机器为美国VPS Hostwinds服务端和客户端:https://www.wireguard.com/install/第三方支持:https://tunsafe.com/download部署:wget –no-check-certificate -qO- ‘https://moeclub.org/attachment/LinuxShell/wireguard.sh’| bash说明:使用的是官方默认端口,端口为:51820.WireGuard 需要 tun 设备才能正常工作.配置文件在 /etc/wireguard .配置文件 wg0.conf 为脚本自动生成的服务端配置文件.服务端已配置自启动, 启动服务命令.#配置文件为 wg0.conf 则命令中使用 wg0 wg-quick down wg0; wg-quick up wg0配置文件 wg0-client.conf 为脚本自动生成的客户端配置文件.将其导入客户端即可使用.客户端配置文件中Endpoint项可以用域名代替IP地址.如果遇到错误请尝试重启,重新跑脚本.如果以下错误请尝试自行更换内核.RTNETLINK answers: Operation not supportedUnable to access interface: Protocol not supportedwireguard.sh#!/bin/bash WG_PORT=’51820′ IPAddr=`wget –no-check-certificate -qO- http://moeclub.org/address` POOL=’https://deb.debian.org/debian/pool/main/w/wireguard/’ [ `dpkg -s libc6 |grep ‘^Version’ |grep -o ‘[0-9\.]\{4\}’ |head -n1 |cut -d’.’ -f2` -ge “14” ] || exit 0 apt-get update apt-get install -y libmnl-dev libelf-dev linux-headers-$(uname -r) build-essential pkg-config dkms resolvconf dnsmasq qrencode arch=`dpkg –print-architecture` Version=`wget –no-check-certificate -qO- “${POOL}” |grep -o ‘wireguard_[0-9\_\.\-]\{1,\}_’ |head -n1 |cut -d’_’ -f2` [ -n “$Version” ] || exit 1 wget –no-check-certificate -qO “/tmp/wireguard_${Version}_all.deb” “${POOL}wireguard_${Version}_all.deb” wget –no-check-certificate -qO “/tmp/wireguard-dkms_${Version}_all.deb” “${POOL}wireguard-dkms_${Version}_all.deb” wget –no-check-certificate -qO “/tmp/wireguard-tools_${Version}_${arch}.deb” “${POOL}wireguard-tools_${Version}_${arch}.deb” dpkg -i “/tmp/wireguard-tools_${Version}_${arch}.deb” dpkg -i “/tmp/wireguard-dkms_${Version}_all.deb” dpkg -i “/tmp/wireguard_${Version}_all.deb” [ -d /etc/wireguard ] && { command -v wg >/dev/null 2>&1 [ $? == 0 ] || exit 1 sed -i ‘/#\?net.ipv4.ip_forward/d’ /etc/sysctl.conf sed -i ‘$a\net.ipv4.ip_forward=1’ /etc/sysctl.conf sysctl -p cat >/etc/dnsmasq.conf< publickey wg genpsk > presharedkey wg genkey |tee privatekey.client |wg pubkey > publickey.client ServerKey=`cat privatekey` ServerPub=`cat publickey` ServerPsk=`cat presharedkey` ClientKey=`cat privatekey.client` ClientPub=`cat publickey.client` cat >simple.conf</dev/null; wg-quick up wg0\n\n” >>/etc/crontab # Try it! wg-quick down wg0 2>/dev/null; wg-quick up wg0 }